Agency Power Can-Am Maverick X3 Cold Air Intake Kit

Agency Power Cold Air Intake Kit For Can-Am Maverick X3 Models, Dry Or Oiled Filter

A Direct Replacement For The OEM Intake, This X3 Cold Air Intake Kit Allows You To Gain Power Without Restriction. Dry Nano-Fiber Filter Or Oiled Filter Options

A cold air intake kit on the Can-Am Maverick X3 Turbo can greatly improve the performance of your vehicle. It is a pretty common practice that a vehicles first mods are intake, exhaust, and ECU tune.

With Can-Am X3 owners doing ECU tunes almost immediately as their first modification, the increased boost levels means the turbo needs more air.

A cold air intake is designed to flow more air than the factory intake.

This different designed intake from Agency Power features a high flow air filter that provides your turbocharger with more CFM when it needs it most.

The factory air box is designed to accommodate the stock power and the everyday driver Can-Am wants you to be.

Chances that is you is slim! Unlike the stock air box or those other flow tubes that just cut the stock air box open, a complete cold air intake is the proper way to gain power without restriction. An intake needs to breathe while filtering out particulates.

By removing the Donaldson air box, you are gaining better throttle response, faster turbo spool, and dyno proven power even without an ECU flash.

Below the filter is a precision laser cut aluminum plate that bolts to the factory lower air box.

This features custom Frogzskin material that is implemented into the aluminum frame.

The Frogzskin mesh repels water, dirt, dust, etc. while still allowing air to flow freely.

The Frogzskin Mesh is a woven polyester material and is HYDROPHOBIC, meaning it will repel water and splashes of water, but it is NOT waterproof.

Eliminating the heavy and bulky Donaldson filter, the Agency Power intake then features an aluminum tube with fittings that attaches directly to your turbochargers compressor side with provided AP silicone coupler.

Each aluminum part is powder coated in a matte black for a clean and stylish finish. Clamps are included to make the kit an easy bolt-on.